MAC Coltellerie AQUATYS 3 diving knife (MC AQT12-4.N)
- AQUATYS 3 diving knife with fixed blade of full tang construction by MAC. The knife lies perfectly in hand is suitable for use during diving expeditions as well as on land. Head of polished stainless steel W 1.4116 with high resistance to corrosion.
75,97 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
AQUATYS 3 diver's knife with a fixed blade of full tang construction produced by the Italian company MAC Coltellerie. Suitable for work during diving expeditions as well as on land.
1.4116, X50CrMoV15 - molybdenum-vanadium steel used for high quality knives, cutlery and surgical tools. It is characterized by relatively high, as for stainless steels, hardness. Resistant to corrosion in kitchen conditions. It is a recommendable alternative to 1.4034 / X46Cr13 / 4H13. The chemical composition is enriched by the content of Chromium, the addition of Molybdenum and Vanadium.
Blade - 3.8 mm thick, made of polished stainless molybdenum-vanadium steel W 1.4116 (X50CrMoV15) with high corrosion resistance, suitable for prolonged contact with water. Steel hardened in the range of 55-56 HRC. Blade is additionally protected by Teflon coating in black and blue in a characteristic "tiger stripes" pattern.
Blade - smooth Plain type led out with Flat Grind, is characterized by good mechanical properties and long holding of sharpness. On the back of the blade is a smooth cutout for cutting rope and undermining crustaceans and a Serrated blade for aggressive cutting of hard materials, plastics and fibrous materials such as rope and nets. The unique Serrated blade alternates between one large and three small "three-step" teeth. This pattern increases cutting edge length by up to 24% over a straight blade. Ideal for aggressive cutting of hard materials, plastics and fibrous materials such as rope and netting.
Handle - black in color. Covered with non-slip textured rubber-like grips made of thermoplastic elastomer, also called TPE (guarantees safe grip in water environment), combined with PP polymer. The ergonomic shape of the facings prevents your hand from slipping during work. The head is finished with a steel hammer.
Sheath - made of ABS plastic with holes for drainage of water, moisture. The holster is equipped with a latch that prevents the knife from slipping out in water. The scabbard comes with two rubber straps and 2 plastic buckles for attaching the case to your arm, leg or vest.
Technical data:
Product number: MC AQT12-4.N
Product name: AQUATYS 3
Type of steel: W 1.4116
Blade length: 120 mm / 4.72"
Blade thickness: 3.8 mm / 0.159"
Total length: 240 mm / 9.44"
Weight: 154 g / 5.43 oz
Cutting edge type: Plain & Serrated
Blade type: Drop Point
Blade finish: PTFE CAMU
Handle material: PP with TPE
Sheath: ABS BLACK
Manufacturer: MAC Coltellerie, Italy
Developed by: Sharg® Company