Spyderco Drunken Carbon Fiber / Titanium, Satin CPM-S90V Plain by Dmitry Sinkevich (C235CFTIP)
- Drunken Carbon Fiber/Titanium, Satin excellent EDC knife designed by one of the hottest names in the world of knifemaking, Dmitri Sienkiewicz. Superb workmanship by Spyderco, excellent materials, reliable construction. An absolute bestseller!
793,42 €
This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Drunken Carbon Fiber/Titanium, Satin excellent EDC knife designed by one of the hottest names in the world of knifemaking, Dmitri Sienkiewicz. Superb workmanship by Spyderco, excellent materials, reliable construction. An absolute bestseller!
Dmitry Sinkevich - in his opinion, a knife can be both a working tool and an object of art, so his designs try to combine unconventional design with utility. In the production of knives, I prefer high-quality corrosion-resistant stainless steels, titanium, modern laminates: carbon fiber and G10, and precious wood. He is always open to any interesting ideas and cooperation in knife design.
CPM S90V - a martensitic stainless high-alloy tool steel with a hardness of 56-59 HRC with 9.0% vanadium (V) and 2.3% carbon (C). The high vanadium content promotes the formation of hard vanadium carbides for strength and exceptional wear resistance, and increases corrosion resistance. This unique steel is designed for the production of high-grade blades and knife wedges. Manufactured by US Crucible Industries using the particle metallurgy / Crucible Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and toughness compared to steels produced by conventional methods.
Blade - with Sheepsfoot profile with a long, gently curved cutting edge, elegantly finished with Satin method. The smooth (Plain) blade was derived with a Full Flat Grind. Enlarged 14mm SpyderHole cutout (Spyderco patent) for ambidextrous thumb opening. The notched thumb ramp jimping support on the back of the blade makes it easier to operate the knife and the Notch (a small indentation between the handle and the cutting edge) dramatically simplifies sharpening the knife. The refined, precision-machined Reeve Integral Lock (R.I.L.) blade locking mechanism guarantees safe and secure operation.
Handle - on the presentation side Carbon Fiber with a chaotic, "drunk" (Drunken) pattern. On the lock side, a solid piece of titanium covered with a delicate spider thread pattern. The facings are connected to each other by a backspacer, anodized in blue. The pivot screw and clip were anodized with the same color. A sturdy, single-sided (right) titanium clip allows the knife to be carried in tip-up position (with the tip of the blade up). The top of the backspacer features a lanyard hole, a hole for a lanyard or cord.
Technical data:
Product number: C235CFTIP
Product name: Drunken Carbon Fiber/Ti
Overall length: 203.0 mm / 8.0"
Blade length: 88.0 mm / 3.45"
Blade thickness: 3.5 mm / 0.138"
Handle length: 117.0 mm / 4.61"
Handle thickness: n.d.
Weight: 108.0 g / 3.8 oz
Blade material: CPM S90V
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Satin
Handle material: Carbon Fiber / Titanium
Handle finish color: Black / Gray
Backspacer material: Titanium
Backspacer color: Blue
Clip: Right, Tip-up
Clip material: Titanium
Pivot mechanism: Washers
Locking mechanism: Reeve Integral Lock (R.I.L.).
Opening method: Manual, thumb hole
Additional accessories: None
Designer: Dmitry Sinkevich
Brand: Spyderco
Manufacturer: Spyderco Inc., USA
Country of Origin: Taiwan
Developed by Sharg® company