FOX Chilin Black G10, Stonewashed N690Co by Jesper Voxnæs (FX-530 G10B)
- Chilin Black G10, Stone Washed, an elegant design by Jesper Voxnaes with a distinctive leaf-shaped wedge. Superb N690Co stainless steel, rugged G10 handle in Jesper's typical utilitarian and modern style!
158,29 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Chilin Black G10, Stone Washed an undersized, elegant with exceptional ergonomics E.D.C. folder, whose shape is derived from traditional Chinese Shilin Cutters. Designed in accordance with the modern, minimalist style of Danish knifemaker Jesper Voxnæs. Lightweight, decorated with refined details, a unique combination of style, functionality and reference to tradition.
Shilin Cutters handmade knives by members of the Chiu family. The history of these knives began in 19th century China and the select few were taught to make them. These folders embody old world craftsmanship, knives that are meant to last a lifetime.
N690Co - cobalt-rich 1.65% (Co) corrosion-resistant, high-carbon 1.07% (C), martensitic chromium steel 17.30% (Cr) with molybdenum 1.10% (Mo), vanadium 0.10% (V). Developed to provide better wear resistance compared to the original Böhler N690 steel, but with higher cobalt (Co) content in its composition. It features exceptionally high corrosion resistance and long edge retention. One of the best tool steels in the world today. Hardened in the range of 58-61 HRC. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - wide, drop point type, in the characteristic leaf shape (leaf shaped). Finished with a scratch-masking Stonewashed method. The generous belly extends the length of the cutting edge in relation to the length of the blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearings support the opening of the blade by means of an opening accessible from both sides of the wedge. A section of the back of the wedge is covered with an upper jimping, notched thumb rest for easy control of the knife. The whole thing is locked with the proven and popular liner lock.
Handle - G10 (fiberglass compressed with synthetic resin) facings insensitive to weather conditions, resistant to mechanical damage. Chamfered edges of the covers eliminate sharp edges for comfortable grip. The yellow oxidized backspacer provides rigidity and solidity to the whole structure. The same color is used for the decorative overlay around the pivot. A two-position (right/left) lightweight wire clip allows the knife to be carried in the tip-up position, with the tip of the blade upward. Above the clip a hole for threading a safety or decorative cord.
Technical data:
Product number: FX-530 G10B
Product name: Chilin Black G10, Stone Washed
Overall length: 190.0 mm / 7.48"
Blade length: 80.0 mm / 3.15"
Blade thickness: 4.0 mm / 0.16"
Handle length: n.d.
Handle thickness: n.d.
Weight: 110.0 g / 3.88 oz
Blade material: Böhler N690Co
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Stone Washed
Handle material: G10
Handle finish color: Black
Backspacer material: Stainless Steel
Backspacer color: Yellow
Clip: Right/Left, Tip-Up
Clip material: Stainless Steel
Pivot mechanism: Ball Bearing (ball bearings)
Locking mechanism: Liner Lock
Opening method: Manual, thumb hole
Additional accessories: None
Designer: Jesper Voxnæs
Brand: Fox
Manufacturer: Fox Cutlery, Italy
Country of origin: Italy
Developed by Sharg® company