WE Knife Riff-Raff Blue Titanium, Hand Rubbed Satin CPM 20CV by Matthew Christensen (WE22020B-2)
- Riff-Raff Blue Titanium, Hand Rubbed Satin, an undersized, heavily built EDC folding knife, a design by renowned custom knife maker Matt Christensen. Superb 20CV steel, titanium Handle, incredible workmanship WE Knife. Perfection!
315,11 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Riff-Raff Blue Titanium, Hand Rubbed Satin, an undersized, heavily built EDC folding knife, a design by renowned custom knife maker Matt Christensen. Superb 20CV steel, titanium Handle, unbelievable WE knife workmanship. Perfection!
Matthew Christensen - Custom Knifemaker from Steger, Illinois. A knife enthusiast since 2007, he founded Christensen Knifeworks in January 2012. Specializing in frame lock and liner lock folding knives, I design and try to come up with great new designs. There is something for everyone, from small EDC-friendly, Fancy Full Dress Builds to large, elaborate knives. His goal as a custom knife maker is to continually improve his knives and the methods he uses to build them. As a result, he creates better products with the best materials available. Knives that customers will brag about, be proud to own, but also that they will use and carry every day.
CPM 20CV - one of the best tool steels, American premium martensitic stainless steel. Manufactured by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 19.0% carbon (C), 20.0% chromium (Cr), 4.0% vanadium (V), 1.0% molybdenum (Mo) and 0.6% tungsten (W). The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - clip point type, finished by hand with an elegant Satin method. The elongated belly extends the length of the cutting edge in relation to the length of the blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ceramic ball bearings support the opening of the blade with a dual thumb stud in the wedge on both sides. The entire blade is locked with the proven and popular frame lock with a steel liner to prevent wiping of the lock face.
Handle - made of 6AL4V titanium anodized in blue. Contouring of the covers eliminates sharp edges. The grips are connected to each other with a titanium backspacer. The upper part of the backspacer with widely spaced "teeth". Texture and milling of the surface improve grip security. The simplicity and robustness of the design give confidence in many years of use. Single-position clip (right), made of titanium, allows carrying the knife in tip-up position.
Case - included zippered soft nylon case with the manufacturer's logo for safe storage and transportation of the folder.
Technical data:
Product number: WE22020B-2
Product name: Riff-Raff Blue Titanium, Hand Rubbed Satin
Overall length: 184.9 mm / 7.28"
Blade length: 79.2 mm / 3.12"
Blade thickness: 3.2 mm / 0.13"
Handle length: 105.7 mm / 4.16"
Handle thickness: 11.2 mm / 0.44"
Weight: 96.6 g / 3.41 oz
Blade material: CPM 20CV
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Hand Rubbed Satin
Handle material: 6AL4V Titanium
Handle finish color: Blue
Backspacer material: 6AL4V Titanium
Backspacer color: Blue
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot Mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Frame Lock
Opening method: Manual, dual thumb stud
Additional accessories: Pouch
Designer: Matthew Christensen
Brand: WeKnife
Manufacturer: We Knife Co., Ltd.
Country of origin: P.R.C.
Developed by: the Sharg® company