Bestech Bruv Bronze Titanium/Ultem, Black Stonewashed M390 by Galovic Design knife (BT2401C)
- Bruv Bronze Titanium/Ultem, Black Stonewashed, a compact folder made of the highest quality materials, designed by Michael Galovic. Blade made of Böhler M390, considered one of the best knife steel, Handle made of titanium.
269,68 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Bruv Bronze Titanium/Ultem, Black Stonewashed is an exceptional example of modern, minimalist design. Its simple shapes are the result of a collaboration between renowned designer Michael Galovic and Bestech Knives. The ergonomic Handle provides comfort even for long hours of use. Made of titanium and ULTEM™ composite, which guarantees its strength and lightness. The blade is made of what is considered one of the best knife steel, Bohler M390, which is known for its strength and long sharpness retention. Frame Lock type lock ensures safety during use. A clip made of titanium makes the knife easy to carry. Bruv is a knife that combines modern design, functionality and top quality workmanship. An ideal choice for anyone who appreciates not only practicality, but also excellent design. Whether you plan to use it on a daily basis or treat it as a collection piece, this knife is sure to meet your expectations.
M390 Microclean® - a martensitic high-performance chrome steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of “wire” during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), hardened between 59-61 HRC, vacuum and cryogenic treatment and double tempering. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Blade - Sheepsfoot type with a scratch-masking finish bathed in fine Stonewashed pebbles and then black coated. The gentle curve of the cutting edge converges towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearings support the opening of the blade with a fast front flipper (index-finger front flipper). A section of the blade's back is covered with an upper jimping, notched thumb rest for easy control of the knife. The whole thing is locked with the proven and popular frame lock with a steel inlay to prevent wiping of the lock face.
ULTEM™ - a plastic belonging to the family of Polyethermoids or simply PEI. This material is characterized primarily by high mechanical and impact strength with a very high strength-to-weight ratio. It is also characterized by high thermal resistance (180⁰C) and high chemical resistance to all kinds of solvents (synthetic and natural), lubricants or other chemicals. Adding to this total insensitivity to weather conditions, we get an ideal material for knife handles.
Handle - the presentation side is made of polished, transparent Ultem™, a virtually indestructible material, insensitive to weather, resistant to chemicals and mechanical damage. The lock side is solid titanium 6AL4V. Chamfered cover edges eliminate sharp edges for comfort, and a fore finger groove improves grip security. The open-backed design fixed with steel spacer sleeves reduces weight and makes cleaning easier. Fore finger groove improves grip security. A single-position, right-handed titanium clip allows the knife to be carried in tip-up position, with the tip of the blade upward.
Case - the knife is packed in a zippered nylon soft pouch with the brand's logo for safe carrying and storage of the folder.
Technical data:
Product number: BT2401C
Product name: Bruv Bronze Titanium/Ultem, Black Stonewashed
Overall length: 211.0 mm / 8.31”
Blade length: 93.0 mm / 3.66”
Blade thickness: 3.8 mm / 0.15”
Handle length: 118.0 mm / 4.65”
Handle thickness: n.d.
Weight: 95.0 g / 3.35 oz
Blade material: Böhler M390 Microclean®
Blade hardness: 60-62 HRC
Blade grind: Flat
Blade finish: Black Stonewashed
Handle material: Titanium 6AL4V / ULTEM™.
Handle finish color: Bronze / Yellow
Backspacer material: Titanium 6AL4V
Backspacer color: Black
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing.
Locking mechanism: Frame Lock
Opening method: Manual, front flipper
Additional accessories: Pouch
Designer: Galovic Design (Michael Galovic)
Brand name: Bestech
Manufacturer: Bestech Knives
Country of origin: P.R.C
Development: the Sharg® company