Microtech Makora D/E Signature OTF Knife Silver Distressed Aluminium/Leather, Black Stonewashed M390 by Tony Marfione (206-1MD)
- Makora D/E Signature Silver Distressed Aluminum/Leather, Black Stonewashed is a full-size OTF automatic knife. Operating in D/A mode, it features a hell of a fast blade extension mechanism. Designed by Tony Marfione owner of Microtech Knives
745,28 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Makora D/E Signature Silver Distressed Auminum/Leather, Black Stonewashed is a full-size OTF (Out The Front) automatic knife. Equipped with a hell of a fast mechanism that extends the razor sharp blade. 100% made and assembled in the USA. Designed by Anthony Marfione, knifemaker and owner of Microtech Knives.
M390 - martensitic high-performance chrome steel produced by powder metallurgy. Due to the alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of “wire” during sharpening. The steel has a high chromium content of 20.0% (Cr) doped with 1.9% carbon (C), vanadium 4.0% (V), and is hardened between 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Nickel Boron Internals - an opening/storage mechanism coated with a special nickel and boron coating to minimize friction and protect against corrosion. Thanks to this, the mechanism works with unprecedented smoothness.
Blade - machine-ground in a Dagger D/E (Double Edge) style, sharpened on both sides. Finished with a scratch-masking bath of Stonewashed pebbles, and then coated with a black coating. The blade is brought out with a high flat grind, providing excellent cutting properties. As a result, the knife has excellent piercing properties while maintaining its strength. The strong mechanism of extending / retracting the blade with the help of a moled Thumb Slide, a stepped slide under the thumb requires for safety the application of a specific force to overcome the resistance of the spring. The method of opening provides seamless opening for both right and left-handed people.
Handle - made with perfect precision in 3D technology on CNC milling machines from brushed and polished 6061-T6 aluminum with artfully glued inlays of top quality leather. The surface texture of the Handle makes the knife non-slip in the hand during use. There are notches (jimping) on the back and bottom of the handle for a more secure grip. The slim profile and the milled two-position (right/left) solid deep-carry clip allow the knife to be carried discreetly in the pocket, in tip-down (blade tip down) position. The clip features the new Makora series logo (claw) and serial number. The Handle is finished with glass breaker, a solid steel triangle, into which a tungsten carbide ball has been pressed.
Technical data:
Product number: 206-1 MD
Product name: Makora® D/E Signature Series Silver Distressed Aluminum/Leather Inlay, Black Stonewashed Standard, Nickel Baron Internals
Overall length: 217.0 mm / 8.55”
Blade length: 86.4 mm / 3.4”
Blade thickness: 3.0 mm / 0.12”
Handle length: 131.0 mm / 5.15”
Handle thickness: 14.0 mm / 0.55”
Weight: 90.7 g / 3.2 oz
Blade material: n.d.
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Black Stonewashed
Handle material: 6061-T6 Aluminum with Leather inlays
Handle finish color: Gray / Brown
Backspacer material: 6061-T6 Aluminum
Backspacer color: Gray
Clip: Right / Left, Tip-down
Clip material: Stainless Steel
Pivot mechanism: n.d.
Locking mechanism: Slide Lock
Opening method: Automatic, push/pull Thumb slider
Additional accessories: none
Designer: Anthony Marfione
Brand: Microtech
Manufacturer: Microtech Knives
Country of origin: USA
Developed by: the Sharg® company