WE Knife Ziffius LE No 184/310 Gray Titanium/Flamed, Hand Rubbed Satin CPM 20CV (WE22024D-4)
- Ziffius Gray Titanium / Flamed, Hand Rubbed Satin LE. Limited edition limited to 310 pcs, folder numbered 184. Winner of awards at the Blade Show Texas knife show in the categories "Best Factory Folder 2023" and "Best in Show Factory Knife 2023."
460,95 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Ziffius Gray Titanium/Flamed, Hand Rubbed Satin LE (Limited Edition). A stunning WeKnife proprietary limited edition design limited to 310 pieces, the knife is numbered 184. A striking EDC folder with a beautiful integral backspacer in thermally tinted titanium and a strong button lock. Ziffius was recognized at the Blade Show Texas knife fair in the categories "Best Factory Folder 2023" and "Best in Show Factory Knife 2023".
CPM 20CV - one of the best tool steels, an American premium martensitic stainless steel. Produced by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. Designed to provide better wear resistance while maintaining corrosion resistance at the highest level. This super steel is comparable to Bohler's M390 steel or Carpenter's CTS-204P. According to some knife manufacturers, 20CV is the best of these three steels in terms of edge retention. It consists of 1.9% carbon (C), 20.0% chromium (Cr), 4.0% vanadium (V), 1.0% molybdenum (Mo) and 0.6% tungsten (W). The high percentage of chromium with a touch of molybdenum makes 20CV one of the best high-end corrosion-resistant steels.
Blade - wharncliffe type, hand finished with Satin method. The straight cutting edge converges towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearing ceramic supports the opening of the blade with a quick flipper (index-finger flipper) when opened acting as a stag. We can also open the knife with a dual thumb stud in the wedge. The whole thing is locked with a solid button lock. A spring is mounted under the lock button, providing sufficient resistance to avoid accidental opening.
Handle - made of solid titanium 6AL4V . Contouring of the covers eliminates sharp edges. Grips are connected to each other with a titanium integral backspacer beautifully colored with a torch. The textured surface improves grip confidence. The simplicity and robustness of the design give confidence in many years of use. The single-position (right) clip, made of flame-dyed titanium, allows the knife to be carried in the tip-up position. Above the clip is a hole for threading a safety or decorative cord. The pivot axis decorated with a flame-dyed titanium rim (pivot collar cap).
Case - included zippered soft nylon case with the manufacturer's logo for safe storage and transportation of the folder.
Technical data:
Product number: WE22024D-4
Product name: Ziffius LE No 184/310 Gray Titanium / Flamed, Hand Rubbed Satin
Overall length: 221.4 mm / 8.72"
Blade length: 93.9 mm / 3.7"
Blade thickness: 3.2 mm / 0.13"
Handle length: 127.5 mm / 5.02"
Handle thickness: 12.2 mm / 0.48"
Weight: 136.9 g / 4.83 oz
Blade material: CPM 20CV
Blade hardness: 58-60 HRC
Blade grind: Flat
Blade finish: Hand Rubbed Satin
Handle material: 6AL4V Titanium
Handle finish color: Gray, Blue
Backspacer material: 6AL4V Titanium
Backspacer color: Flamed
Clip: Right, Tip-Up
Clip material: Titanium 6AL4V
Pivot mechanism: Caged Ceramic Ball Bearing
Locking mechanism: Button Lock
Opening method: Manual, flipper, dual thumb stud
Additional accessories: Pouch
Designer: We Knife
Brand name: WeKnife
Manufacturer: We Knife Co., Ltd.
Country of origin: P.R.C.
Developed by: the Sharg® company