Microtech Stitch S/E Knife Fluted OD Green G10, Apocalyptic M390MK by Borka Blades and Tony Marfione (169RL-10APFLOD)
- Stitch S/E Fluted OD Green G10, Apocalyptic manual version of the popular design by Sebastijan Berenjie of Borka Blades and Microtech. Wide harpoon-shaped blade, excellent materials and legendary quality workmanship from Microtech Knives.
432,54 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Stitch S/E Fluted OD Green G10, Apocalyptic manual version of the bold design of the versatile tactical knife, the result of a collaboration between Sebastijan Berenji and Microtech. A wide Blade and a simple handle, comfortable in every grip, give a strong tactical knife made with attention to the finest details and from the best materials. A faithful companion that will never disappoint
Borka Blades (Sebastijan Berenji) is a very popular creator of custom knives with skills that attract a multitude of blade lovers. Sebastijan was born and raised in Yugoslavia and became a US citizen in 2016. The company is named after his late mother, Borka. A few years after he began his career as a knifemaker, he designed a unique folding knife and generated a lot of interest among collectors and enthusiasts. He not only attracted attention but also attracted the interest of Microtech Knives CEO Anthony Marfione, who offered him a partnership.
M390MK - a collaboration between Microtech and Böhler engineers resulted in an exclusive version of M390 steel made only for Microtech. The carbon content has been increased and subjected to closer scrutiny thus improving the properties of M390 steel to provide better edge retention, corrosion resistance and polishing. Martensitic high-performance chromium steel produced by powder metallurgy. Due to its alloy concept, it has extremely high wear resistance and high corrosion resistance. Due to its high wear resistance, it adequately maintains the shape of the edge, so the blade stays sharp for a very long time (requiring minimal maintenance). Another of the advantages is resistance to the formation of “wire” during sharpening. The steel has a high chromium content of 19.0% (Cr) doped with 1.95% carbon (C), vanadium 4.0% (V), and is hardened to 59-61 HRC. This super steel is comparable to Carpenter's CPM 20CV or CTS-204P steels. Manufactured by Böhler Edelstahl in Kapfenberg, Austria.
Ram-Lock (Crossbar Lock) - a crossbar that moves horizontally in longitudinal cutouts in the steel side plates of the handle frame. When the knife is opened, the locking bar overlaps the back of the blade from above, preventing its return movement. This beam is pressed down by two springs. Unlocking is done by pulling back the locking bar, the ends of which are accessible through cutouts in the grips on the sides of the Handle grips. In the locked position, the bar presses against the cam surface at the rear of the blade, preventing it from opening on its own. Advantages of the Ram-Lock include resistance to contamination, practical insensitivity to dynamic loads, ease of operation with both right and left hands, and lightweight operation.
Blade - wide, S/E type (Single Edge Spear Point), finished with a striking Apocalyptic patination. The gently curved cutting edge converges towards a needle-sharp tip. The solid thickness of the blade combined with a flat grind (Flat Grind) gives excellent cutting properties combined with high durability. The long false blade on the back increases the already not inconsiderable material piercing properties. The knife is opened by a wide opening in the blade (thumb hole). To maintain full control over the blade in the lower part we have a large, serrated finger place (finger choil) and on the back of the wedge was made upper jimping, notched support for the thumb. The whole is locked with a convenient Ram-Lock.
Handle - made on CNC milling machines with excellent precision, made of G10 composite, a virtually indestructible material insensitive to weather, resistant to chemicals and mechanical damage, with a deeply milled 3D Fluted structure. Wide locking slide with Microtech's signature stepped X structure. Both grips are bolted together with a solid aluminum backspacer. The double-sided (right / left) clip allows you to discreetly carry the knife in tip-up position. The protruding part of the backspacer in which there is a hole for a rope, can also serve as an improvised glass breaker.
Technical data:
Product number: 169RL-10APFLOD
Product name: Stitch S/E Fluted OD Green G10, Apocalyptic
Overall length: 216.0 mm / 8.5”
Blade length: 95.2 mm / 3.75”
Blade thickness: 4.0 mm / 0.16”
Handle length: 127.0 mm / 5.0”
Handle thickness: 15.7 mm / 0.62”
Weight: 164.0 g / 5.8 oz
Blade material: Böhler M390MK
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Apocalyptic
Handle material: G10
Handle finish color: OD Green
Backspacer material: 6061-T6 Aluminum
Backspacer color: Gray
Clip: Right/left, Tip-up
Clip material: Stainless Steel
Pivot mechanism: n.d.
Locking mechanism: Ram-Lock
Opening method: Manual, thumb hole
Additional accessories: none
Designer: Borka Blades (Sebastijan Berenji) / Anthony Marfione
Brand: Microtech Knives
Manufacturer: Microtech Knives
Country of origin: USA
Developed by: the Sharg® company