Remette RT-Swordfish CP Knife Gray Aluminum/Carbon Fiber, Ceramic Sandblasted S35VN (ZL103D1)
- Swordfish CP Gray Aluminum/Carbon Fiber, Ceramic Sandblasted. An innovative knife from the Remette Knives manufactory. OTF with gravity-extending CPM S35VN steel blade. Aluminum Handle with innovative slider blade release system.
142,02 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Swordfish CP Gray Aluminum / Carbon Fiber, Ceramic Sandblasted open intuitive, folding knife from the Remette Knives manufactory, a display of engineering in design. Gravity OTF (Out The Front), Blade extends from the front due to the force of gravity. Modeled on the design of the Luftwaffe gravity air knife, commonly known as the knife of German paratroopers. Intuitive blade ejection / retraction with one hand (under the influence of gravity) and excellent materials such as CPM S35VN blade steel and aluminum handle, perfectly combined with the unmatched quality of the Remette brand!
CPM S35VN - an American martensitic high-alloy stainless steel with a hardness of 59-61 HRC, one of the best blade steels. Designed to provide better strength compared to CPM S30V, while keeping corrosion resistance at the highest level. Manufactured by US Crucible Industries using the particle metallurgy / Crucible® Particle Metallurgy (CPM) method. The CPM process creates a very homogeneous, high-quality steel with excellent dimensional stability, grindability and ductility compared to steels produced by conventional methods. The chemical composition has been balanced so that it is composed of 0.5% niobium carbides (Nb) along with 3.0% vanadium (V) and 14.0% chromium (Cr) carbides. Replacing some of the niobium carbides with vanadium carbides makes the steel about 15-20% harder than S30V without sacrificing wear resistance, and it is also easier to machine and polish. The improved strength of CPM S35VN also provides better resistance to edge chipping.
Blade - machine ground with Clip Point profile , with a single-sided sharpened edge. Finished with Ceramic Sandblasted + Manual Wire Drawing Effect giving a stunning effect. The belly extends the length of the cutting edge in relation to the length of the slender blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. A very practical option is the possibility to reposition the blade and adjust it for left-handed people . All you have to do is unscrew a few screws and rotate the blade 180 degrees in the guide. Mechanical locking by snapping the two grips on the top and bottom of the wedge.
Handle - made on CNC milling machines from aluminum, with three-dimensional texture. The chamfered edges of the covers eliminate sharp edges, and the perfectly matched Carbon Fiber composite inlay (inlay) adds an exclusive touch and improves grip security. On the right side, an artful slide for advancing/retracting the blade. A single-position titanium (right) deep-carry clip allows the knife to be carried discreetly in a pocket in tip-down position (blade tip down).
Additional accessories - a leather sheath for carrying and storing the knife.
Technical data:
Product number: ZL103D1
Product name: Swordfish CP Gray Aluminum / Carbon Fiber, Ceramic Sandblasted.
Overall length: 198.0 mm / 7.8"
Blade length: 80.0 mm / 3.15"
Blade thickness: 3.0 mm / 0.12"
Handle length: 118.0 mm / 4.65"
Handle thickness: 13.8 mm / 0.54"
Weight: 88.5 g / 3.12 oz
Blade material: CPM S35VN
Blade hardness: 60-62 HRC
Blade grind: Flat
Blade Finish: Ceramic Sandblasted + Manual Wire Drawing Effect.
Handle material: Aluminum with Carbon Fiber inlay
Handle finish color: Gray / Black
Backspacer material: Aluminum
Backspacer color: Gray
Clip: Right, Tip-Down
Clip material: Titanium
Pivot mechanism: Slide system
Locking mechanism: Handle Lock
Opening method: Manual, gravity
Additional accessories: Leather sheath
Designer: Remette Knives
Brand: Remette Knives
Manufacturer: Remette Knives
Country of origin: P.R.C.
Developed by: the Sharg® company
