FoxEdge Atrax OD Green Micarta, Satin by Simonutti (FE-027 MOD)
- Atrax Green Micarta, compact EDC folding knife, design by Denis Simonutti. This knife by the Italian designer combines hard to beat value for money and functionality. Equipped with Liner Lock. Satin blade.
33,20 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Fox Cutlery is one of the companies coming from the famous "knife basin" Maniago in Italy. In cooperation with the best knifemakers they create excellent knives with the best materials.
Atrax Green Micarta, compact folder E.D.C., design by Denis Simonutti. The project of the Italian designer combines a quality/price and functionality ratio that is hard to beat.
Blade - 3 mm thick with Wharncliffe profile, provides excellent cutting-edge geometry at low resistance. Blade is made of well sharpened 8Cr13MoV stainless steel (equivalent to Japanese AUS-8 steel). Plain type blade with Flat Grind for excellent cutting performance and weight savings. Elegant Satin finish. Cut-outs in the blade allow opening the blade with cold or wet hands as well as in a glove. Additionally, the knife can be opened with a flipper. Both methods are suitable for both right- and left-handed operation. Corrugated supports: thumb ramp (spine jimping) and finger choil jimping, index finger undercut on lock.
8Cr13MoV - easy to sharpen stainless knife steel, equivalent to Japanese AUS-8 steel. High content of 13.0% chromium and average 0.8% carbon provide excellent corrosion resistance. The presence of 1.0% silicon, 0.3% molybdenum increase the steel strength and wear resistance. 8Cr13MoV is characterized by high hardness in the range of 57-62 HRC.
Skeletonized stainless steel plates provide exceptional strength of construction, while forming the basis for the Liner-Lock mechanism of the jimped liner head lock. The whole is bolted together with torx screws for easy unfolding and folding of the folder.
Handle - profiled, covered with non-slip textured grips made of green micarta (durable, resistant to high and low temperatures, chemicals). Facings are attached to a solid spacer (so called backspacer / handle linings connector) made of G10 plastic, which provides strength of construction. Solid, double-sided cutout in the handle guarantees intuitive right/left hand access to the opening as well as to the head lock release. Metal clip (right side) allows you to carry the knife in tip-up position. The lanyard hole in the back of the handle is for attaching a lanyard or safety line.
In 1977, after many years of experience in manufacturing and trade, Oreste Frati founded FOX Cutlery. This professional tradition, combined with a constant drive for technological innovation, has built FOX Cutlery's reputation as one of the leading companies in the national and international market. With the highest quality standards, Fox has been recognized by NATO as an official supplier with N/CAGE CODE: AG180. The prestige of this company is also evidenced by the important awards awarded such as the IWA International Knife Award in the Special Knives category and the Blade Magazine Award as "Most Innovative Imported Design", "Imported Knife of the Year", "Knife Collaboration of the Year" and "Overall Knife Of the Year 2018" and "Overall Knife of the Year 2019".
Technical Data:
Product Number: FE-027 MOD
Product name: Atrax Green Micarta
Overall length: 170.0 mm / 6.69"
Blade length: 80.0 mm / 3.15"
Handle length: 90.0 mm / 3.54"
Blade thickness: 3.0 mm / 0.12"
Weight: 96.0 g / 3.39 oz
Blade Material: 8Cr13MoV
Blade Hardness: 57-59HRC
Blade grind: Flat (flat)
Blade finish: Satin
Handle Material: Canvas Micarta
Handle Finish Color: Green
Backspacer Material: G10
Backspacer Color: Orange
Clip: Single position (right), Tip-Up
Clip Material: Stainless steel
Pivot mechanism: Washers
Lock: Liner Lock
Designer: Denis Simonutti
Brand name: FoxEdge
Manufacturer: Fox Cutlery, Italy
Developed by: Sharg® company