Degreaser for KTJ NU-Blak Oxidation No. 16 50ml (ODT-050-P)
- NU-Blak No. 16 degreaser liquid 50 ml for cold oxidizing. It is used to remove dirt before the oxidation process. The blackening (oxidation) system of metals by the English company Blackfast Chemical LTD (the leader of blackening at room temperature).
Gwarantowany zwrot
do 30 dni od zakupu
Bezpłatna dostawa
do paczkomatu już od 50 zł
Zapłać póżniej
do 30 dni po zakupie
Autoryzowany serwis
kupuj bez zmartwień
Wyłączny dystrybutor
czołowych marek
Firma z tradycją
ponad 30 lat na rynku
Description
Dane techniczne
Warranty
3,46 €Oxyda cold - a blackening system for metals, cast iron using the „Blackfast” method of the English company Blackfast Chemical LTD (a leader in the field of blackening at room temperature). Until now, oxidation was possible using expensive equipment by boiling in chemical solutions at high temperatures of 140 ° C. This made impossible the oxidation process on its own.
Process of cold oxidation - before oxidation, oxidized metal surfaces should be cleaned of rust, dirt, grease with the NU Blak Nr 16 degreaser made by Blackfast. For the oxidation process, it is necessary to physically and chemically clean the metal surface. If necessary, first use a rust remover.
Oxidation steps:
1. apply NU-Blak No. 16 degreaser to the metal surface to be oxidised.
2. remove degreased with a dampened cloth.
3. Using a clean cloth, apply NU-Blak Nr 82 oxidizing to the surface to be oxidised. Wait 3-5 minutes.
Apply the oxidiser several times until a nice black coating results.
4. remove the excess NU-Blak Nr 82 with a clean wet cloth or wash under running water.
5. For protection against corrosion, use Brunox® Gun Care Spray. Remove excess oil after use.
6. the oxidation process has been completed.
Attention! Highly flammable. Irritating to skin and eyes. Keep away from children.
Directed by: Sharg® - direct importer
Sharg Warranty
Ask a question
Write your opinion