- Harpy is the one of the most popular knives with the Hawkbill head. The rounded shape of the blade is characterized by great cutting efficiency. Japanese steel VG-10...

This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Harpy Stainless Steel is one of the most popular knives offered on the market with the Hawkbill head. The rounded shape of the blade is characterized by great cutting efficiency - the Hawkbill blade imitates the way the eagle's claws are shattered - piercing and cutting.
Blade - Hawkbill profile, 3 mm thickness, with an aggressive shape. Made of Japanese, stainless tool steel VG-10 (high resistance to abrasion and mechanical damage), it is characterized by a good hold of the focus). The blade is hardened in the range of 59-61 HRC. Spyder serrated blade is ground with a concave cut (Hollow grind) for effective cutting of the serrated cutting surface and ultra thin tip. The SpyderHole round cut-out (Spyderco patent) allows you to open the knife with your thumb. Blade lock (Back-Lock) with additional protection against accidental release of the lock during a strong knife grip (notch in the blockade) of David Boye's project.
Handle - covered with stainless steel (Stainless Steel) cladding. The safety of use is enhanced by an ergonomically profiled grip ensuring comfortable and secure grip even when wearing gloves. The openings in the cladding allow the dampened blade to dry faster by circulating the air. The pocket knife is equipped with a solid, screw-on clip with the possibility of fixing in four levels (4-way clip positions). In the back of the handle was placed gap for a rope.
Spyder Edge - (Spyderco patent) a serrated blade usually has a few millimeter smooth blade on the tip side. Spyder blade consists alternately of one large and two small teeth called „two-step”. This pattern increases the cutting edge length by up to 24% compared to the straight edge. Ideal for cutting hard materials, plastics and fibrous materials. It works, among others in sailing rescue, while diving.
Technical specification:
Product number: C08S
Name: Harpy Stainless Steel SpyderEdge
Steel type: VG-10
The length of the blade: 70 mm / 2.75 "
Thickness of the blade: 3 mm / 0.12 "
Overall length: 168 mm / 6.63 "
Composite length: 99 mm / 3.88 "
Weight: 108 g / 3.8 oz
Cutting edge type: Spyder (serrated)
Cut type: Hollow Grind (concave)
Type of blade: Hawkbill
Lock type: Back-Lock
Handle type: Stainless Steel
Clip: 4-position ambidextrous (Tip-Up / Down)
Country of production: Japan
Producer: Spyderco, U.S.A.
Created by: Sharg® Company - direct importer