LionSteel Myto Carbon Fiber, Satin M390 by Molletta (MT01 CF)
- Myto Carbon Fiber, Satin Finish a high-tech Hi-Tech folder with a durable frame-lock. Exceptional EDC knife, M390 steel blade, ReF blade on the bottom of the head, Double Crown ball bearing system, titanium clip and HY 68 Hand key.
348,10 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Myto Carbon Fiber, Satin a high-tech Hi-Tech folder with a durable frame-lock. An exceptional E.D.C. knife by the Italian LionSteel manufactory. Features M390 sintered steel blade, "ReF" on the underside of the blade, Double Crown ball bearing system and titanium clip. Comes with LionSteel Hand (#HY 68), Torx T6, Torx 8 adjustment wrench along with Hex wrench for glass breaker screw.
Design by Molletta, result of a collaboration with a well-known and respected designer with many years of experience. Michele Pensato (a.k.a. Molletta), is distinguished by a new approach to the use of materials and experiments in the application of heat treatment and the use of advanced software in the design of knives.
M390 Microclean® - head made of the highest quality modern powder steel with extremely high corrosion and abrasion resistance. High chromium steel with a doping of vanadium with a hardness of 60-61 HRC. Manufactured in Austrian steelworks Böhler-Uddeholm.
Blade - with Drop Point profile with well defined blade belly for excellent cutting edge geometry and extreme cutting performance. Smooth blade (Plain type) was made with Flat Grind, which perfectly presents a satin finish.
ReF - (Removable Flipper System) located on the underside of the head projection / flipper fin assisted by Double Crown makes it easy to open the blade with one hand. It consists of a small lever (projection) protruding beyond the back of the handle when the head is closed. In the open position the protrusion acts as a hilt, protecting the hand against slipping on the blade. In the folder it is possible to unscrew the Removable Flipper System lever (unscrew the flipper fin and then insert the second screw located in the box) and open the blade with both hands. This is important in countries where there is a ban on using knives with one hand opening blades in public places.
Double Crown - bearing system is an evolution of the standard mechanism. It improves blade rotation, allows faster, even smoother blade opening and keeps the blade stable in a straight line.
Handle - asymmetrical made of double milled solid titanium 6AI-4V, which is the base of the mechanism locking the blade and carbon fiber. The facings are attached to the titanium spacer backspacer / facings connector. The open-backed design reduces weight and simplifies cleaning. Solid® titanium clip allows knife to be carried in tip-up position. Bolted to titanium frame with tungsten carbide screw/glass breaker. In the back of the linings lanyard hole, a hole for a cord.
Set included:
- Myto Carbon Fiber folder
- HY 68 wrench
- additional screw for flipper fin
- elegant cardboard gift box, fully recyclable
Technical specification:
Product number: MT01 CF, (MT01CF)
Name: Myto Carbon Fiber, Satin Blade
Overall length: 201.0 mm / 7.91"
Blade length: 83.0 mm / 3.27"
Blade thickness: 4.0 mm / 0.16"
Handle length: n.d.
Thickness of handle: n.d.
Weight: 105.0 g / 3.70 oz
Blade material: Böhler M390
Blade hardness: 59-61 HRC
Blade grind: Flat Grind
Blade finish: Satin
Handle material: Carbon Fiber
Handle finish color: Black
Backspacer material: Carbon Fiber
Backspacer color: Black
Clip: Right/Left, Tip-Up
Clip material: Titanium 6AI4V
Pivot mechanism: Double Crown Ball Bearing (ball bearings)
Locking mechanism: Frame Lock
Opening method: Manual, flipper
Additional accessories: Torx T6 and T8, Hex
Designer: Michele "Molletta" Pensato
Brand: Lion Steel
Manufacturer: lionSTEEL
Country of origin: Italy
Development: by Sharg® company