Demko Knife AD20.5 Clip Point Black Peel Ply G10, Stonewashed D2 by Andrew Demko (205-D2-BLKPPG10-CP)

AD20.5 Clip Point Black Peel Ply G10, Stonewashed D2, the result of years of work and experience of Andrew Demko, a long-time designer at Cold Steel. A compact folding knife that was designed for the toughest tasks. A real tool, characterized not only by its robustness and power, but also by its unique design. Ergonomic Handle, made of G10 composite and Blade made of D2, a proven tool steel. One of the most important elements of the knife is its lock. Shark-Lock™ is an innovative mechanism that is considered one of the strongest in the world. Thanks to it, the knife is not only safe to use, but also gives you the confidence that it will stand up to even the toughest tasks. This is an exceptional example of a compact EDC (Every Day Carry) knife, an excellent choice for anyone looking for a reliable everyday tool.

Andrew Demko - owner and founder of Demko Knives, first started forging chisels in 1988, when he was in seventh grade. He immediately realized it was his passion and began forging knives almost immediately. Like many blacksmiths, Andrew began his journey in the garage, honing blade shapes and sharpening them on a small grinder. Andrew's passion for engineering and attention to detail was noticed by the well-known Cold Steel company. At Cold Steel, Andrew developed some of the most innovative and powerful locking mechanisms in the industry. The legendary Tri-Ad Lock, Scorpion Lock, and most recently the one-handed operator's dream - the Shark-Lock.

D2 - a high-carbon, high-chromium high-speed tool steel heat-treated to 58-60 HRC. With a high 13.0% chromium (Cr) content, it offers greater corrosion resistance than most high-carbon steels. Combines strength, excellent edge holding and easy sharpening. Features high wear resistance due to high carbide content in the microstructure.

The Shark-Lock™ mechanism is located on the back of the knife and is operated by a ramp-like "flipper". Opening the blade causes the spring-driven locking arm to move up and then into a notch in the shank, placing it under the locking pin. Uniquely, the locking mechanism moves forward and backward while simultaneously moving up and down. This allows for an increase in the size of the blade contact area, providing better mechanical strength in a specific area. And because the drive spring that moves the locking element upward to the locked position is located in the locking arm itself, it will not be exposed to dirt and debris.

Blade - Clip Point type, finished with a scratch-masking bath of fine Stonewashed pebbles. The belly extends the length of the cutting edge in relation to the length of the slender blade converging towards the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind gives excellent cutting edge geometry and extreme cutting performance. Ball bearings support the opening of the blade with either a dual thumb stud in the blade (dual thumb stud) or an oval hole (thumb hole). The entire blade is locked with what is considered the world's strongest Shark-Lock™.

Handle - grips made of G10, a virtually indestructible plastic that is insensitive to weather conditions, resistant to chemicals and mechanical damage. Chamfered edges of the covers eliminate sharp edges and characteristic surface texturing improves grip confidence. A single-position, right-handed clip allows the knife to be carried in the tip-up position, with the tip of the blade upward. A left-handed clip is included.

Technical data:
Product number: 205-D2-BLKPPG10-CP
Product name: AD20.5 Clip Point Black Peel Ply G10, Stonewashed D2

Overall length: 194.0 mm / 7.625″
Blade length: 80.8 mm / 3.18″
Blade thickness: 3.2 mm / 0.125″
Handle length: 114.0 mm / 4.5″
Handle thickness: n.a.
Weight: 105.0 g / 3.7 oz

Blade material: D2
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Stonewash

Handle material: G10
Handle finish color: Black
Backspacer material: Stainless Steel
Backspacer color: Gray

Clip: Right, Tip-Up
Clip material: Stainless Steel

Pivot mechanism: Ball Bearing (ball bearings).
Locking mechanism: Shark-Lock™
Opening method: Manual, dual thumb stud, thumb hole
Additional accessories: Left-handed clip

Designer: Andrew Demko
Brand: Demko
Manufacturer: Demko Knives
Country of origin: Taiwan

Developed by: the Sharg® company