LionSteel Nano Nebula Fat Carbon, Old Black MagnaCut Knife (NA01 NB)
- Nano Nebula Fat Carbon, Old Black advanced handheld knife. Frame lock, titanium and fatcarbon handle. Blade made of MagnaCut steel, ReF fin on the bottom of the blade, Double Crown ball bearings, titanium clip, torx key. An excellent helper!
319,89 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Nano Nebula Fat Carbon, Old Black advanced handheld knife. Frame lock, titanium and Fat Carbon handle. Exceptional EDC knife MagnaCut steel blade, ReF fin on the underside of the Blade, Double Crown ball bearings, titanium clip. You can always carry it with you! Torx T6, Torx 8 bolt adjustment wrench included.A great helper for everyday adventures!
CPM MagnaCut - Powdered stainless steel produced by the Crucible® Particle Metallurgy (CPM) process hardened to 60.5-62.5 HRC. The high content of vanadium 4.0% (V), molybdenum 2.0% (Mo) and niobium 2.0% (Nb) guarantees accuracy and purity unmatched by more “conventional” steels. Designed and developed specifically for blade production by Larrin Thomas, it meets all the requirements of knife enthusiasts. With CPM, MagnaCut was able to create a steel that combines unique properties like no other knife steel. The result is a blade material that offers a remarkable balance of wear resistance, strength and corrosion resistance. There is no other steel on the world market today that offers a comparable combination of superior properties. This unique steel is manufactured at Crucible® Industries' American steel mills.
Blade - drop point type, finished with a scratch-masking bath of fine Stonewashed pebbles and then coated with a black coating, an effect LionSteel has named Old Black. The generous belly extends the length of the cutting edge relative to the length of the blade converging toward the needle-sharp tip of the knife. The thickness of the blade provides high strength while the high, flat grind guarantees excellent cutting properties almost on the level of a razor. Ceramic ball bearings support the opening of the blade with a quick index-finger flipper (flipper) when opened acting as a stag. The entire blade is locked with the proven and popular frame lock with a steel inlay to prevent wiping of the lock face.
ReF - (Removable Flipper System) located on the underside of the blade protrusion / flipper flipper assisted by Double Crown makes it easy to open the blade with one hand. It consists of a small lever (protrusion) that extends beyond the back of the Handle when the Blade is closed. In the open position, the protrusion acts as a stinger, protecting the hand from slipping on the blade. In the folder, it is possible to unscrew the Removable Flipper System lever (unscrew the flipper fin, then insert the second screw included in the box) and open the blade with both hands. This is important in countries where there is a ban on knives with one-handed opening blades in public places.
Handle - the presentation side is made of Nebula Fat Carbon, the locking side is made of solid titanium 6AI4V., the grips are screwed to a CNC-milled titanium backspacer, which provides the desired rigidity and strength of the entire structure. Chamfering of the covers eliminates sharp edges for comfort, and the fore finger groove made on the front improves grip security. A two-position (right/left) titanium deep clip allows you to carry the knife discreetly in tip-up (tip up) position. Under the clip, lanyard hole, a hole for a safety or decorative cord.
Technical data:
Product number: NA01 NB
Product name: Nano Nebula Fat Carbon, Old Black
Overall length: 162.0 mm / 6.38”
Blade length: 65.0 mm / 2.56”
Blade thickness: 3.8 mm / 0.15”
Handle length: n.d.
Handle thickness: n.d.
Weight: 101.0 gr / 3.56 oz
Blade material: CPM MagnaCut
Blade hardness: n.d.
Blade grind: Flat
Blade finish: Old Blue finish
Handle material: Titanium / Fat Carbon
Handle finish color: Black / Nebula
Backspacer material: Titanium
Backspacer color: Black
Clip: Right / Left, Tip-Up
Clip material: Titanium
Pivot mechanism: Ball bearings
Locking mechanism: Frame Lock
Opening method: Manual, flipper
Additional accessories: None
Designer: lionSTEEL
Brand: lion STEEL
Manufacturer: lionSTEEL sas di Pauletta Gianni M. D.
Country of origin: Italy
Developed by: the Sharg® company