Spyderco Temperance Sprint Run Gray FRN Knife, Satin SpyderEdge CPM Cru-Wear by Sal Glesser (FB05SGY)
- Temperance Sprint Run Gray FRN, Satin SpyderEdge CPM Cru-Wear, limited edition handy EDC knife. Large, comfortable FRN composite handle, elite CTS-CruWear steel, extremely durable and long lasting sharpness. An excellent tool for the field!
191,97 €This product is intended for use only by adults with knowledge and experience in handling sharp cutting tools. Improper use of the knife can result in serious injuries. The blade is extremely sharp and can easily cut through skin and tissue; therefore, extra caution should always be exercised while cutting, and hands should be kept away from the cutting edge. To prevent the knife from slipping, it is recommended to cut on a stable, non-slip surface and avoid excessive force, which may cause uncontrolled blade movement.
Leaving the knife on the edge of a table, countertop, or in easily accessible places—especially where children are present—poses a significant safety risk. The knife should always be properly secured after use, ideally by placing it on a stable surface or storing it in designated knife blocks, protective sheaths, or magnetic strips. The knife should never be used for tasks it is not designed for, such as opening cans or prying objects, as this can damage the tool and lead to dangerous accidents.
A dull blade increases the risk of injury, as it requires more force and is more likely to slip from the material being cut. Therefore, it is essential to sharpen the knife regularly to maintain optimal sharpness. Additionally, proper cleaning and drying of the knife are necessary to prevent corrosion and bacterial growth. Periodic inspection of the handle and blade is recommended to check for cracks, chips, or looseness. If any damage is detected, the knife should be repaired or replaced immediately.
When using the knife, focus solely on the task at hand—avoid talking on the phone, watching television, or other distractions while cutting. Ensure proper lighting in the workspace for better visibility and control. Please note that some countries or regions have laws restricting the ownership and carrying of knives. Before purchasing or using this knife, verify that its use is legal in your location according to applicable regulations.
Following these safety guidelines will help ensure safe and effective knife use, minimizing the risk of accidents and extending the lifespan of the tool.
Temperance Sprint Run Gray FRN, Satin SpyderEdge CPM Cru-Wear is a limited edition handheld EDC knife designed by Spyderco founder Sal Glesser. This unique knife features a large, ergonomic Handle made of FRN (fiberglass-reinforced nylon) composite, which provides excellent durability and comfort. The blade is made of elite CPM Cru-Wear steel, known for its exceptional wear resistance and durability. With a full flat grind, the blade offers precise cutting. The knife comes with a specially designed Boltaron sheath , which provides secure storage and easy access. In addition, the sheath features a versatile G-Clip for a variety of attachment options. The Temperance Sprint Run is an excellent tool for field use, combining functionality, durability and aesthetics
CPM Cru-Wear - premium high-carbon air-hardening tool steel with a hardness of 60-65 HRC. Produced by US Crucible Industries according to the CPM (Crucible Particle Metallurgy) process as an improvement on the manufacturer's conventional Cru-Wear and D2 steels. Produced according to the CPM process, it is more resistant to chipping and cracking than most conventionally manufactured tool steels. It is not a stainless steel; to qualify as a stainless steel, it must contain at least 12% chromium. CruWear contains 7.5% chromium, but still offers a fair level of corrosion resistance. It contains a high content of 1.1% carbon, 7.5% chromium, 1.6% molybdenum, 2.48% vanadium and 1.15% tungsten, providing a balance for key properties: hardness, impact strength, edge retention, machinability, wear resistance and easy sharpening. It's not easy to find a steel that performs so well in so many categories.
SpyderEdge - (Spyderco patent) new serrated Spyder blade with improved edge geometry, consists of alternating one large and two small teeth known as two-step. This pattern increases the length of the cutting edge by up to 24% compared to a straight blade. Ideal for cutting hard materials, plastics and fibrous materials such as rope, belts, among others.
Blade - Leaf-Shaped type (leaf shape), finished with elegant satin finish. The SpyderEdge serrated blade is derived with a Full Flat Grind, which gives excellent cutting edge geometry and extreme cutting performance. At the top, a SpyderHole branded with the manufacturer's trademark hole. Notched thumb ramp on the back of the Blade increase the control of the knife.
Handle - in gray color. Non-slip texturing and recesses on both sides of the Handle strengthen the grip even with wet hands. Made of FRN (Fiberglass Reinforced Nylon), a fiberglass-reinforced nylon, lightweight composite material, insensitive to weather, resistant to chemicals and mechanical damage. In the back of the Handle a hole (lanyard hole ) for the cord.
Sheath - made of Boltaron®, holsters and cases made of it are characterized by resistance to scratches and chemicals. Equipped with a multi-position G-Clip handle with two adjusting screws, which allows carrying on a belt or on a weapon's armor in six different positions.
Technical data:
Product number: FB05SGY
Product name: Temperance Sprint Run Gray FRN, Satin SpyderEdge CPM Cru-Wear.
Overall length: 239.0 mm / 9.42”
Blade Length: 113.0 mm / 4.46”
Blade Thickness: 4.0 mm / 0.157”
Handle length: n.d.
Handle thickness: n.d.
Weight: 153.0 g / 5.4 oz
Blade material: CPM Cru-Wear
Blade hardness: n.d.
Blade grind: Full Flat
Blade finish: Satin
Handle material: FRN (Fiberglass Reinforced Nylon).
Handle finish color: Gray
Sheath (holster): Boltaron®
Accessory: G-Clip
Designer: Sal Glesser
Brand name: Spyderco
Manufacturer: Spyderco Inc., USA
Country of origin: Japan
Developed by: the Sharg® company